Scams... Food for Thought!

[spyhunter]

[Daz467]

First off, I believe I speak for the majority of people with this note of THANKS, for all the tips emptiers.

Secondly, here's a bit of fun news..I work in a sort of back street arcade. I always win from the fruities..not because of how I play them (Though I do to a degree)...but because I'm the lucky bastard who gets to empty them at the end of the day (Pity I only work 2 days a week)..
Half for me..half for the boss..Everyone's happy
Pity its like a backstreet arcade..it doesn't get very busy at all, so there is never usually a lot to empty, but thats not the point..
the point is, I get to empty them hense I open the door at the bottom..I'm no engineering genius, but surely their must be a way to abuse this? A way to say Clicking a button, or fiddling with a wire, and giving the machine a bunch of freee credits, from which it will actually play out from.. or better still, a way of making the machine pay out its coins via the paying out slot, like a hopper dumb test etc?

Any feeback anyone? SpyHunter?

Daz.

[stew]

IF YOU'VE GOT THE CASH, CHECK IT OUT!

http://www.hackershomepage.com/ via andyz


stewart

[big_bad_dan]

i heard about this scam which works with all electronical machines that can dish out cash
here goes
basically all u do is pour an electrolyte (conducting sollution, water mixed with salt does the job) into the part of the machine that u would place money, this should result in an electric current and the machine should just empty
whether it works or not is another question, i would reckomend trying it in a very quiet place where u wont get caught!

[stew]

make sure your earthed too !!!!!!!!!!!!!!

stewart

[badboyfruity]

Is there any one on this board who have actually tried some of these? Come on own up, jus wanna know what works and wot dont

[stew]

both strimming and rodding were nice little earners if you could dodge the boys in blue

stewart

[andy257]

you will be lucky if any of them work these days m8, they are old old methods. strimming and rodding are long gone. with the technology in new cabinets its almost impossible to do any of the methods. the IR device i have heard of but with mixed opinions, some say it works some say it dont. it only works on one make of machine apparently.

dont waste your time or £££ with any of them thats my opinion
andy257

[stew]

exactly! hence the word were

stewart

[bonesey2000]

Laser Pointers

A cunning little method for affecting the light sensors on the hopper, where by you would collect a bank of money from the machine and whilst pressing collect - point the dot on the sensor. This would result in the coins not being counted properly and the hopper possibly paying out until empty. Most machines have shrouds or adjusted layouts to stop this scam.

where r u sposed to point the laser? where r these light sensors on the hopper, i didnt think u could see the hopper from the outside?

can some1 let me no, cheers, bones